- 您现在的位置：买卖IC网 > Sheet目录1229 > MAX9598EVKIT+ (Maxim Integrated Products)KIT EVAL FOR MAX9598
MAX9598 Evaluation Kit
MAX9598 EV Kit Files
5) Connect the 3.3V/250mA DC power supply to the
VVID and the GNDVID pads on the MAX9598 EV kit
FILE
INSTALL.EXE
MAX9598.EXE
FTD2XX.INF
UNINST.INI
USB_Driver_Help.PDF
DESCRIPTION
Installs the EV kit files on your
computer
Application program
USB driver file
Uninstalls the EV kit software
USB driver installation help file
board.
6) Connect the 3.3V/100mA DC power supply to the
VAUD and the GNDAUD pads on the MAX9598 EV
kit board.
7) Connect the GNDVID and GNDAUD pads together
at the board.
8) Connect the V12GND and GNDAUD pads together
at the board.
Quick Start
Recommended Equipment
Before beginning, the following equipment is needed:
9) Connect the DIGGND and GNDAUD pads together
at the board.
10) Connect the DVD player output to the appropriate
ENC input(s).
?
?
?
?
?
?
?
MAX9598 EV kit (USB cable included)
A user-supplied Windows 2000/XP/Vista-compatible
PC with a spare USB port
12V/100mA DC power supply (V12)
3.3V/250mA DC power supply (VVID)
3.3V/100mA DC power supply (VAUD)
DVD player with S-video, composite, or RGB outputs
S-video to BNC Y connector
11) Connect a VCR to the VCR (P2) SCART connector.
12) Connect a TV to the TV (P3) SCART connector.
13) Connect the USB cable from the PC to the EV kit
board. A New Hardware Found windows pops up
when installing the USB driver for the first time. If
you do not see a window that is similar to the one
described above after 30s, remove the USB cable
from the board and reconnect it. Administrator privi-
leges are required to install the USB device driver
on Windows.
Note: In the following sections, software-related items
are identified by bolding. Text in bold refers to items
directly from the EV kit software. Text in bold and under -
lined refers to items from the Windows operating system.
Procedure
The MAX9598 EV kit is fully assembled and tested. Follow
the steps below to verify board operation. Caution: Do
not turn on power supplies until all connections are
made.
1) Visit www.maxim-ic.com/evkitsoftware to download
the latest version of the EV kit software, 9598Rxx.ZIP.
Save the EV kit software to a temporary folder and
uncompress the ZIP file.
2) Install the EV kit software on your computer by run-
ning the INSTALL.EXE program inside the temporary
folder. The program files are copied and icons are
created in the Windows Start | Programs menu.
3) Verify that all jumpers (JU1–JU7) are in their default
positions, as shown in Tables 1 and 2. Do not turn
on the power until all connections are made.
4) Connect the 12V/100mA DC power supply to the
V12 and the V12GND pads on the MAX9598 EV kit
board.
14) Follow the directions of the Add New Hardware
Wizard to install the USB device driver. Choose the
Search for the best driver for your device option.
Specify the location of the device driver to be
C:\Program Files\MAX9598 (default installation
directory) using the Browse button. During device
driver installation, Windows may show a warning
message indicating that the device driver Maxim
uses does not contain a digital signature. This is not
an error condition and it is safe to proceed with
installation. Refer to the USB_Driver_Help.PDF doc-
ument included with the software for additional
information.
15) Turn on the power supplies.
16) Start the EV kit software by opening its icon in the
Start | Programs menu. The EV kit software main
window appears, as shown in Figure 1. Observe as
the program automatically detects the address of
the MAX9598 and starts the main program.
_______________________________________________________________________________________
3
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
MAX9652EVKIT+
EVAL KIT FOR MAX9652
MAX9660EVKIT+
EVALUATION KIT FOR MAX9660
MAX9670EVKIT+
EVALUATION KIT FOR MAX9670
MAX9671EVKIT+
EVALUATION KIT FOR MAX9671
MAX9694EVKIT+
EVAL KIT FOR MAX9694
MAX97003EVKIT#
EVAL KIT MAX97003
MAX97220AEVKIT+
EVAL KIT
MAX9725EEVKIT+
KIT EVAL FOR MAX9725
相关代理商/技术参数
MAX9600EUP
功能描述:校验器 IC Dual ECL-D/Q PECL 500ps Comparator RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX9600EUP+
功能描述:校验器 IC Dual ECL-D/Q PECL 500ps Comparator RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX9600EUP+T
功能描述:校验器 IC Dual ECL-D/Q PECL 500ps Comparator RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX9600EUP-T
功能描述:校验器 IC Dual ECL-D/Q PECL 500ps Comparator RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX9601EUP
功能描述:校验器 IC Dual ECL-D/Q PECL 500ps Comparator RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX9601EUP+
功能描述:校验器 IC Dual ECL-D/Q PECL 500ps Comparator RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX9601EUP+T
功能描述:校验器 IC Dual ECL-D/Q PECL 500ps Comparator RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel
MAX9601EUP-T
功能描述:校验器 IC Dual ECL-D/Q PECL 500ps Comparator RoHS:否 制造商:STMicroelectronics 产品: 比较器类型: 通道数量: 输出类型:Push-Pull 电源电压-最大:5.5 V 电源电压-最小:1.1 V 补偿电压（最大值）:6 mV 电源电流（最大值）:1350 nA 响应时间: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SC-70-5 封装:Reel